Fields of application
Quick Stone is also a floor with virtually unlimited possibilities.
The laying system is universally applicable - in the private
as well as the commercial sphere, inside as well as outside.
And while doing so it does not impose high demands on the
existing surface of the substructure. It just has to be level.
While doing so, it makes no difference whether it concerns
a screed-topping floor or wooden planks.
Thus said, the uncoupled laying system can also be installed
on existing floor coverings and on floor heating. The floating
installation makes it possible for the substructure to move
and to "work" - without influencing the natural
stone tiles in the process.
You can also spare the removal of your old parquet flooring
or PVC floor covering with the installation of Quick Stone.
And if your floor should ever exhibit any uneven spots, you'll
be shown on Page 45 how you can easily level these spots out.
Quick Stone is not limited to inside areas; outdoor installation
is also possible. But while doing so it is to be noted that
installation outdoors and in damp rooms poses other requirements
on the water impermeability of tiling.
This is why a special grouting material has been developed
especially for this area by the Quick Stone experts. This
special material is utilised instead of the normally integrated
soft plastic grout.
100 percent water impermeability is established through the
grouting with this material. As a result, your natural stone
floor also withstands any weather in the outdoors.
A natural stone floor that is easy and simple to install
and that can even be reused again. This is the ideal floor
covering for every home, even for the rented home. And it
is the ideal floor covering for commercial areas.
Whether as a permanent solution for office and sales premises
or as mobile presentation areas for trade fair appearances,
the Quick Stone floor cuts a good figure everywhere. Guaranteed!
|
